Rough Country 2.5" Lift Kit for 2004-2012 Chevy Colorado/GMC Canyon 4WD - 920

Very pleased with this kit for as simple as it is. Quick easy install straightforward easy to follow direction. The 2.5” make a world of difference on how mean the hummer looks. Does ride stiffer overall but this is always the case with torsion bar set ups. Went in almost to easy honestly counted 15 turns until loose removing key bolt. Installed the spacers and reinstalled 15 turns once snug. Measured center of the hub before just under 21” after install 23.75

Very easy to install and lifted my 2008 Colorado nicely. It raised the back 3/4 of an inch and then I just matched the front to the rear height. Along with taller tires, my truck is looking good. Would recommend having new shocks and leaf spring bushings ready for this install. But that was a problem with my truck, not the lift kit itself. Snow salt is a b!$ch

Lifted truck as advertised. Slightly stiffer suspension in the front end as expected.

Simple installation, leveled out my 2004 GMC Canyon nicely. Gave it a “more aggressive” stance.

So I only used the spacers for the torque bars to raise the front of my H3T, and discarded the brackets for the rear as well as the spacers for the front shocks after you raise the front. I got some Bilstein Shocks to replace the OEM, overall everything took about two hours.

The kit was really good looks good on the only thing was i need to get new shock the factor ones were the little spacer would go didn't fit do to rust so ordered aftermarket shocks that come with the spacer in them for the hight different but all and all looks good and would get another one as well

This kit was pretty easy to lift the Colorado. The shackles were a perfect fit and Good quality. The torsion bar bolt spacer had no issues either. Truck does ride a little rougher but that's what a torsion bar lift and shackle lift will do. I would recommend it for a slight lift on a budget. -William

This lift was very any to install and my truck is not any more stiff. Unfortunately I forgot to measure the starting height of my truck and I cant quite tell if it's really as tall as they said it should be.

This is a real nice kit. Although I only used the rear shackle . It was cheaper to get the kit with free shipping then just buy the shackle with 90 dollar shipping . I never used the front bar spacers ,as I had already done the bolt turn lift . Not even sure what they do ,just so you don't have to count the turns I guess . Never used the little shock spacers as I put on 5100 Bilstein shocks . Any way H3 sits real nice now .

This was really quite easy to install. I have not had a wheel alignment done yet but the truck drives quite well. The front does ride a bit stiffer, but the it only stands to reason that the tighter you make the torsion bars to gain height, the stiffer the ride has to be. You can’t fight physics. I have already recommended this to a friend. After all adjustments I was able to even all 4 corners of the Colorado out to be the same height with an average 2.5 inches of lift. Sweet!!!

Stout product great manufacturer. But they REALLY need to provide 4 new shackle bolts!Because the chances of saving the factory bolts are zero if they are stock ones. The factory bolts will rust inside the bushings. Only way to remove them is to cut them…