Deliver to Moldova
IFor best experience Get the App
ESP32 S2 Mini V1.0.0 WiFi Board Based ESP32-S2FN4R2 ESP32-S2 4MB Flash Type-C Connect Fit for MicroPython
Details
- BrandDiGiYes
- Model NameDiGiYes ESP32
- Ram Memory Installed Size4 MB
- Memory Storage Capacity4 MB
- Connectivity TechnologyWi-Fi
Description
🚀 Elevate your IoT game with the ESP32 S2 Mini – where power meets precision!
- COMPACT YET MIGHTY - Ultra-compact 1.34 x 1.02 inch footprint fits perfectly into any prototype or final product design.
- POWERFUL MEMORY COMBO - 4MB Flash paired with 2MB PSRAM delivers smooth multitasking and ample storage for complex applications.
- PLUG PLAY TYPE C USB - Modern Type-C interface guarantees hassle-free, reversible connections and fast data transfer.
- SEAMLESS WI FI INTEGRATION - Cutting-edge 802.11a/b/g/n/ac ensures lightning-fast, reliable wireless connectivity for your IoT projects.
- VERSATILE PERIPHERAL SUPPORT - Supports ADC, DAC, I2C, SPI, UART, and USB OTG for ultimate hardware flexibility and control.
The ESP32 S2 Mini V1.0.0 is a compact, high-performance WiFi development board featuring the ESP32-S2FN4R2 chip. It supports a broad range of interfaces including ADC, DAC, I2C, SPI, UART, and USB OTG, with 27 digital I/O pins capable of PWM and interrupts. Equipped with 4MB Flash and 2MB PSRAM, plus a modern Type-C USB port, it’s optimized for MicroPython and ideal for advanced IoT and embedded projects.
Specifications
| RAM | PSRAM |
| Wireless Type | 802.11a/b/g/n/ac |
| Brand | DiGiYes |
| Series | DiGiYes ESP32 S2 Mini V1.0.0 |
| Operating System | MicroPython |
| Item Weight | 0.422 ounces |
| Product Dimensions | 1.34 x 1.02 x 0.31 inches |
| Item Dimensions LxWxH | 1.34 x 1.02 x 0.31 inches |
| Processor Brand | Espressif |
| Number of Processors | 1 |
| Manufacturer | DiGiYes |
| ASIN | B0BXX6R15D |
| Date First Available | March 9, 2023 |
Reviews
T**R
Ps4 usability
Wanted a board for ps4 modding and this was it. cheap and easy setup.
R**R
After trying others that didn't work, these did the trick.
Works perfectly for automated PS4 jailbreaking. No more inserting and unplugging usb drives. Just open the browser, and the exploit runs and GoldHen loads automatically.
A**R
MicroPython flash
Installed Micropython and it reports 2MB of PSRAM. Had to use the ESP flash_download_tool. First download MicroPython ESP_Generic_S2. As others have said, plug it into your PC, hold the boot(0) button down, press reset button, and then release boot(0) button. Check in device manager to make sure it shows up under ports. Then in the flash_download_tool, select chip type esp32-s2, develop, and uart. Erase. Select ESP32_Generic_S2 of MicroPython. I wrote it to 0x1000 using defaults. But I think I also tested 0x0000. After writing is complete, press the reset button. If everything went well, you should see a new (different) COM Port listed in Device Manager.The boards seem to work just fine for MicroPython, and the extra memory and speed compared to ESP8266 boards is very handy.The double rows of pins take some getting used to, but I would rather have the pins for the size. But plan ahead on your board layouts and connections it can get messy fast.Right now it appears to be the cheapest, fastest way to get a usable (memory) version of MicroPython on a small board.
J**N
Nice cheap little ESP32. Great for small projects.
Great little MCU. Used 1 for an air quality sensor.
B**.
Works Great
Work flawless!
B**G
Skip this chip if you are a beginner trying to use Arduino IDE for programming
I purchased this item to start learning how to program the ESP32 in the Arduino IDE environment. After many hours of trying and researching, I could not get a Sketch (Arduino program) to upload to the DiGiYes ESP32 without causing the following error:WARNING: ESP32-S2FNR2 (revision v1.0) chip was placed into download mode using GPIO0.esptool.py can not exit the download mode over USB. To run the app, reset the chip manually.To suppress this note, set --after option to 'no_reset'.Failed uploading: uploading error: exit status 1As the boards did not come with any documentation, I will have to order a different board before I can return to learning how to program this chip.
T**N
Useful and inexpensive
Why did you pick this product vs others?:Picked these for an IOT project. Using these plus a 2410c microwave presence detector to switch on lights in a bathroom.
E**S
Good for PS4 jailbreak use
Used for my PS4 jailbreak which worked great.
Common Questions
Trustpilot
5 days ago
1 month ago
