LED Strip Light

The Lepro 5M LED Strip Light is a fantastic lighting solution that combines brightness, flexibility, and ease of installation. Whether you’re enhancing your kitchen ambiance or adding accent lighting to your workspace, this product delivers impressive performance. ✅ Highlights: • High Brightness: With 300 LEDs emitting 1650 lumens, this strip provides ample illumination, making it suitable for various settings like under cabinets, workbenches, or display areas. • Dimmable Functionality: The included dimmer switch allows for adjustable brightness, enabling you to set the perfect lighting mood for any occasion. • Easy Installation: The self-adhesive backing ensures a hassle-free setup. Simply peel and stick to a clean, dry surface. • Safe and Energy-Efficient: Operating at 12V, it’s safe to touch and energy-efficient, reducing electricity consumption without compromising on brightness.  ⚠️ Considerations: • Indoor Use Only: This strip is not waterproof, so it’s best suited for indoor applications. • Cutting Limitations: While the strip can be cut to size, the cut sections require additional connectors or power supplies to function, which are not included.  💬 Final Thoughts: The Lepro 5M LED Strip Light stands out for its brightness, ease of use, and versatility. It’s an excellent choice for anyone looking to upgrade their indoor lighting with a reliable and efficient solution.

Extremely simple to install under a shelf straight out of th box. And 5 star in use - liked the dimmer. Two tiny issues to be aware off. I did not need the additional supports for installing around corners - had to look at the online guidance to find out what the bits of plastic were for And, the plug/transformer has the connection lead coming from the bottom, which could be awkward in some locations

First of all these are great lights for the price - you cant go wrong. They come nicely packaged which is also secure to prevent any damage during transit. INSTALL: Simply and easy. My advice is to give yourself as much space as possible whilst doing so, for example if you were putting this around a skirting board then move as much furniture out of the way as you can. Believe me it speeds up the process and makes it a lot easier instead of reaching over and around things. The lights are self adhesive so you just remove the tape as you put the lights into place but its also great that you have a 150cm cable from the lights to the power cord as well allowing for extra movability. If the lights are too long you can cut them down along where the scissors symbols are situation along the lights. If they are too short or you wish to add additional lengths, although Ive not tried it, you can add more a with a 2pin 8mm led strip connector. The dimming control is a nice option however this is something I didnt need so its great that you do not have to have this connected in order for the lights to work. You can just connect the led strips directly to the power cord. Once set up just turn them on and you are ready to go! Overall Im very happy with my purchase the only reason for the 4 stars is I wish they were a bit brighter for my needs. Still look great though! Pros: Easy to install. Long power lead. Can be used without the dimmer attachment. Look great. Cons: Although bright, not as bright as my previous ones. Still made up with them though and highly recommend!

Great value for money, very bright in my use case, which was lighting for floating shelves.

7.5W of LED strip that you can cut and rejoin easily for under £15 all inclusive. Pretty good if it works. Two joining clips and a clip to DC plug link were included. The far end of the strip has two wires soldered onto it. This makes splitting the strip into two particularly easy. I cut the strip, attached the clip/lead link to the cut end of the first LED portion, cut the DC plug off the lead to access the 12V wire, attached 3 meters of low voltage wire to it with standard connectors, attached the end of that wire to the existing wires on the end of the LED strip and ended up with LED's under the units on both sides of the kitchen (after negotiating a 3 meter route behind the cooker hood) The unit even comes with a little wand which turns it on/off and selects 100% / 50% / 25% intensity as desired. For parties, etc you can select them flashing (!) As it happens, I preferred 50% but sometimes use 100% if I'm doing detailed work under the lights. The colour temperature is 3000K, the same as the ceiling LED downlights. The 6000K lights would look blue in most kitchens, I should imagine. The transformer is plugged onto a socket behind the toaster out of sight. The wand is wireless operated and works two rooms away through two walls! I tried - I'm like that. It's very small (8cm) and discrete and contains a battery which will cost pence to replace when the time comes. The photos show the kitchen with no lights and at the three light intensities. The job took an hour or two but would have been far quicker if I hadn't been using one kit for both sides of the kitchen with all that meandering 3 meters to deal with. The LED strips have very sticky backing which looks to stay that way, though I'll be careful not to expose it to kettle steam or toaster heat. I used a few dozen cable clips to secure the wiring firmly - I should imagine the weight of the wire would pull the strip away at the end sooner or later. It's not often I write a review, but I've made the effort this time. It's still working, by the way

This is a brilliant product at a really good price. I have used almost the full 5 metres - one long piece to go around the top of a wardrobe and then 3 smaller pieces to go inside and light up when the doors are opened (you need the LED motion switches, which are sold separately, but make sure you get ones that are compatible with the 5050 series LED). It is easy to cut. If, like me, you cut it into a number of strips, then you will need some more connectors of the right type (5050 compatible, 5mm wide I think), but they are cheap and quickly delivered from Amazon. Make sure you watch the vid on YouTube so you understand how to fix the connectors to the strip correctly, otherwise the air will be blue and you will waste LED strip. You have to cut it in the right place, then cut through and STRIP AWAY THE PLASTIC TOP COATING TO EXPOSE THE CONTACTS then make sure you have the +ve side of the strip to the +ve side of the connector, then slide the strip into the connector, put the cap over and snap it in place - it works! This kit comes with a radio transmitter and in-line plug in receiver, so you can control the lights from anywhere in the room. There are different modes, although I only use the 100%, 75% and 25% switches. The flashing light modes will drive you crazy. You can power the (in my case 4) cut strips from the one transformer if you are useful with some simple cable connectors and a bit of 2-core cable from your local DIY. Cheap as chips. Works a treat. Really impressed and would recommend it for wardrobes - probably really good for kitchens too. I'm not so sure I would trust it to work outside as I suspect the connectors would not be waterproof. If you could keep the transformer dry and the connectors, chances are it could work outside - its only 12V outlet.

I orginally brought one lot to try under my kitchen cupboards to give the kitchen som under light on worktops. Wow, these really are a great buy, so much so i brought another 7, to go all round the kitchen, i had to buy seperate as my cupboards are spaced apart. Not only do these really make my kitchen look beautiful, they are also dimmers, so you can hae them at any brightness you want. Super easy to install, just peal back and stick (on clean dry surface) then i just stuck the dimmer switch to the wall. I can honestly say we dont need the big ceiling light on now. For me these were just what i wanted and am so pleased with them. It was also handly that they were in this lengh to , as i think if they had been longer it would have been to much, much better for the small areas. I would recommend deffaitnly. Wish i had got another one for my sons bedroom now.

So annoying having to write this review and only give 3 stars overall when actually the product itself is amazing. It’s amazingly bright and has an adjustable remote where you can dim the light up and down. It’s all round amazing but the thing that ruins it ALL, is that 4 lights at the bottom of my mirror (see photo) have stopped working which ruins the whole product. It means I’m gonna have to take the lights down as it looks very odd and ruins the whole display- and what’s worse is, I’m not entitled to a refund or a new set to be sent to me because I’ve had them 7 months. I don’t know about any of you guys, but I’d expect a set of lights like these to last more than 7 months, especially when they are self-adhered to my mirror now which means I’m gonna have to peel them all off. Not happy at all and amazon said they had a “sufficient life span” when I explained I hadn’t even had them a year... so what I would say is yes they’re a good set of lights and very bright, but only buy if you’re prepared to replace every half a year. Wouldn’t be so bad if I was sent a new set but that’s not the case. Disappointed :-(.