- Futaba 10JH 2.4GHz 10-Channel S/FHSS radio system with R3008SB T-FHSS telemetry-capable receiver.
- Perfect for a whole host of applications: Airplane, helicopter, glider and multi-rotor menus are all included.
- 10 channels; telemetry data can be viewed on the backlit LCD screen and audibly reported through headphones; fully programmable and user updateable.
- Heli version - defaults to helicopter settings when powered up and has a non-ratcheted (smooth) throttle stick.
- Includes transmitter, receiver, switch harness, and neck strap; servos not included.
Futaba consistently delivers the very best radios and the 10J is
no exception. Its full list of features is below, but here are a
few of the best: 10 channels, telemetry capable, fully
programmable and user updateable. The functions can be assigned
to a multitude sticks, switches, knobs and levers. The telemetry
data can be viewed on the backlit LCD screen and audibly reported
through headphones. Three buttons and a jog dial make it
exceptionally easy to program. Plus, it's light weight, easy to
handle and equipped with an astonishing 30 model memory. Updating
is simple, so your transmitter will never be out of date.
All those features and more are included in a radio that's also
the first to have multi-rotor helicopter programming. It's
perfect for a whole host of applications: Airplane, helicopter,
glider and multi-rotor menus are all included.
Even with all its features, the Futaba 10J is still the most
inexpensive telemetry enabled radio system on the planet. It's
priced right for a first time radio, but packed with so many
features pros will love it as well.
When you're ready for a radio that can fly anything, comes packed
with features and includes a powerful telemetry-enabled receiver,
pick up the Futaba 10J. You'll be glad you did.
The R3008SB is a T-FHSS telemetry-capable receiver that features
S.Bus and S.Bus2 compatibility and 8 conventional ports. The
receiver also features an external battery voltage connector.
System Features
* Futaba T-FHSS, S-FHSS 2.4GHz security
* Airplane, heli, glider and multi-rotor software. 10JH defaults
to heli on new setup
* 30-model memory
* S.Bus capable T-FHSS receiver
* Telemetry
* Synthesized voice for telemetry data
* Vibration alerts for alarm conditions and low battery
* User-updatable software (requires optional CIU-2 interface)
* Wireless data transfer among 10J transmitters
* Built-in S.Bus programming link for S.Bus servos
* 10-character model and user naming
* Large (128 x 64 dot) backlit LCD display
* 10 channels (one variable knob, five 2-position switches, two
3-position switches, one momentary switch, two digital levers)
* Built-in diversity antenna
* Jog dial and 3 buttons for fast, easy programming
* Sub-trim and fail-safe (all channels)
* Servo reversing, endpoint adjustment, digital trims, dual
rates/exponential* & ATL
* Trim step adjustability
* Trainer system
* Throttle cut
* 2 count-up/-down timers + integrated timer
* Model timer
* Range check mode
* Servo cycle w/bar graph displays
* Assignable switch/lever/functions (Ch. 5-10)
Airplane Menu Features
* 6 programmable mixes
* 9 factory-defined mixes
* Flaperons with differential rate
* Flap trim
* Differential ailerons
* Gyro sensitivity
* 5-point throttle and pitch curves
* Throttle delay
* Idle down
Glider Menu Features
* 6 programmable mixes
* 3 factory defined mixes
* 5 wing types
* Gyro sensitivity
* Motor menu
* 2 flight conditions
Helicopter Menu Features
* 6 programmable mixes
* 10 factory-defined mixes
* 8 swash plate types
* 5 flight conditions w/delay
* Throttle curve (4 curves, 5 points)
* Differential ailerons
* Pitch curve (5 curves, 5 points)
* Throttle hold & delay
* Swash AFR
* Electronic swash ring
Multi-Rotor Menu Features
* 6 programmable mixes
* Gyro sensitivity/mixing
* Center stick alarm
Transmitter Specifications
* Type: 2-stick, 10 channel, T-FHSS Air-2.4GHz system
* Transmitter Frequency: 2.4GHz band
* System: T-FHSS Air, S-FHSS, switchable
* Power Supply: 6.0V dry battery
R3008SB Receiver Specifications
* Type: T-FHSS Air-2.4GHz, dual antenna diversity, S.BUS system
* Power Requirement: 4.8-7.4V battery or regulated output from
ESC (Note: When using ESCs make sure the regulated output
capacity meets usage application)
* Size: 0.98 x 1.86 x 0.56" (24.9 x 4703 x 14.3mm)
* Weight: 0.36oz (10.1g)
* Battery F/S Voltage: Sets up with transmitter